The process can be a bit tedious if you’re just getting started, but it’s worth it if you want a good result.
With a little patience and practice, you can print your very own silk printer with a lot of effort.
We’ll walk you through the process and show you how to get a print out in about 5 minutes.
Here are the steps.1.
Choose your printer.
Most printers are a little bigger than a standard inkjet and you might want to get something a bit bigger.
If you can find a printer that’s small enough to fit inside your hand, it’s a great option.
If not, you’ll need to find something a little smaller.2.
Put the ink in the printer.
You want to print the paper using a black ink, which will add a nice glossy finish to the paper.
Use your printer’s built-in control pad to select the desired ink.
You can use the built-up settings on your printer to set your printer for this.3.
Set the settings.
To print out your own printer, open the printer settings.
On the top right, you will see a number next to the printer’s name.
That number will be your ink pressure level.
The lower that number, the more ink you will need to use to print.
On our test printer, it was around 250 pounds per liter.
To get a nice, shiny finish, we recommend using around 300 pounds per litre.4.
Select the desired paper.
You’ll see the settings for the paper you want to use in the settings menu.
You need to select at least one type of paper to get your printer going.5.
When you’re done printing, click the print button to make the paper come out.
If the printer is already working, the ink will continue to flow.
It should take about 5-10 seconds for the print to print to the desired level of ink.6.
Save the file.
You should get a file that looks like this.
In this case, we’ve printed our print from our favorite paper, paper from an old laptop, and an old sewing machine.
If this file is on a hard drive, it will take about 20 minutes to print it.
The print time will vary depending on the quality of the paper used.7.
Now it’s time to print out the final print.
If your printer has built-out control, you should be able to set the printer to print only one type at a time.
For the most part, you want your print to be a little larger than the print you got when you first printed it.
If it’s not, adjust the settings to get the desired print size.8.
If everything is working properly, the printer should have printed your paper.
It’ll have a very glossy finish and look great.
We’d recommend saving the print file and printing it later.9.
If you need to get started printing more than one piece of paper, we have some great tips for how to do this.
If you want more tips, check out our list of the top tips for the best print and web services.